Skip to main content
RamyCook

A Checklist Before You Put a Self-Service Noodle Machine in Your Store

Published

A convenience store counter with a blurred drinks fridge behind it

The barrier to deploying a self-service noodle machine is low, but a few things are worth verifying before you buy so the unit does not sit idle after arrival.

1. Water supply

The machine takes a dual inlet: a water purifier or bottled purified water. Direct connection to mains tap water is not recommended. On a purifier, the JM9A has a flow requirement (600 gallons or more, or with a pressure tank) and needs a negative-pressure valve; the M5A and M8A work with either.

2. Water level and power

The tank must hold more than 1 litre before the machine dispenses, and it beeps when empty. Power is an ordinary 220V outlet with a 10A earthed plug and about 1400 mm of exposed cord.

3. Throughput

A bowl takes 3 min 30 sec to 5 minutes depending on the menu. For back-to-back servings, leave the container in place, hold the water key to top up and press the heat key to add 30 seconds at a time.

4. Consumables

Serving uses induction-compatible paper bowls (foil lining, thrown away after use) or iron/steel pots. Paper bowls are a recurring consumable and are not included with the machine.

5. Cleaning and descaling

Routine care is emptying the residual water and wiping the inner pot and heating plate dry. The machine has a descaling function; descale periodically based on local water hardness.

6. What unattended really means

The machine has an automatic standby safety mode: if unsuitable cookware is placed or the pot is removed and not replaced within 1 minute, the induction cooker switches off. Anti-dry-burn protection is not permission to run it empty.

7. Who configures the menus

The three presets ship with factory values. In standby, hold Water + M2 to enter manager mode and adjust each menu to the noodle types you actually sell.

8. Which model for which store

For supermarket counters pick the M8A, the smallest body. For open counters and high turnover pick the M5A. For 24-hour unattended stores pick the instant-heating JM9A.

Related reading

For maintenance after deployment, see the cleaning guide and the five early signs of scale.